1PCS DC40C DC42C DC40CR DC42CR Generator Engine AMF Controller Module Monitoring Control Panel with CAN Communication Port(DC40C)

Control ModulesThis series controller is specialized for Diesel / Gasoline / Gas Genset Start, Stop, Parameters monitoring, faults-checking as well as data setting.2.8 inch screen display with UI designis adapted in this controller that the relative failures can be displayed directly. All the parameters can be displayed bysimulated indicators and words. Besides, screen can display various faults in the same time that the genset will be stopped once it can't work smoothly.There are Chinese/English interface options, more language can be set according to user's request. All the parameters can be configured through the frontface buttons or use programmable interface by RS485 or USB to adjust via PC. It can be widely applied for all kinds of auto control system of gensets.2. Main FeaturesThere are eight Models under DC4xS/C series.DC40S: Used for single machine automation. Start/Stop through remote start signal.DC40SR: Based on DC40S, it adds RS485 port.DC42S: Based on DC40S, it adds Mains monitoring and AMF (Mains/Generator automatic switching control), especially suitable for the automation system composed by mains and genset.DC42SR: Based on DC42S, it adds RS485 port.DC40C: Used for single machine automation. Start/Stop through remote start signal. it adds CAN port.DC40CR:Based on DC40C, it adds RS485 port.DC42C: Based on DC40C, it adds Mains monitoring and AMF (Mains/Generator automatic switching control), especially suitable for the automation system composed by mains and genset.DC42CR: Based on DC42C, it adds RS485 port.we maily introduce "C" series model:Dual core 32bit high performance single chip microcomputer.2.8 inch 240 * 128high-resolution screen, Available in 6 languages, user's language set if necessary.Indicator and number display through UI surface.Acrylic material is adapted to protect the screen.Silicone panels;USB Port: parameters can be set even without power through USB port to monitor in real time.With RS485 communication port, can achieve "Three Remote" functions via MODBUS protocol.Standard CAN communication port, built-in J1939 protocol, has matched more than 40 kinds of engines;Various kinds of parameters display.Input/output function, status can be shown directly.Real time clock inside: preset time operate and auto maintenance is available. Genset working plan can be set as per week or month.Maintenance countdown function, can set maintenance time or date.The black box function can save the relevant parameters of the unit when the fault alarm occurs in real time, and it is convenient to find the cause of the fault.Totally 6relay's output, among which 4 relay output can be self-configurable, each relay can be set as max 20 functions.With 4 switches input, up to 20 functions optional;3 sensor simulation input connectors, the oil pressure sensor is compatible with voltage signal input, and various display units can be configured.Battery charging control function,which can protect the battery according to battery voltage status.Sensor can be self-defined by front face button or PC software. Adapt to 3P4W,1P2W,2P3W(120V/240V,50/60HZ)Various of crank conditions (RPM, Frequency, Oil Pressure) can be chosen.Control Protection: Auto Start/Stop of genset, load transfer (ATS control) and perfect failure display and protection. Standard water-proof rubber gasket. The waterproof can IP54Module design: All the connections are adapted with European connectors so that installation, connection, repair and replacement can be more easily3. Parameters DisplayEngine RPMEngine oil pressureEngine temperatureEngine fuel levelEngine battery voltageCharging voltageCAN related parameters(C series only)Mains Frequency (only for DC42S/C)Mains phase voltage L-N (only for DC42S/C)Mains phase voltage L-L (only for DC42S/C)Generator 3 Phase voltage L-NGenerator 3 Phase voltage L-LGenerator 3 phase current AGenerator Frequency HzGenerator Power Factor COS Generator active power KWGenerator apparent power KVAGenerator reactive power KVarReal-time load rate %Current load rate %Average loading rate %Current consumption KWHTotal consumption KWHTotal Crank timesCumulative power on time of controllerCurrent running timeTotal running timeMaintenance noticeSwitches input status displayOutput status display of relaysCurrent date and time;4. ProtectionOver speedUnder speedLow oil pressureHigh temperatureLow fuel levelExternal emergency alarmD+ openRPM LostSensor OpenOver FrequencyUnder FrequencyOver voltageUnder voltageOver currentNon-balance of currentOver powerMaintenance expireLow water level alarmEmergency StopCrank failureBattery over voltageBattery under voltageThe charger fails to chargeCharger charging failureStop FailureECU alarm failureECU communication Failure

• Control Modules
• 1PCS DC40C DC42C DC40CR DC42CR Generator Engine AMF Controller Module Monitoring Control Panel With CAN Communication Port