220V Foot-Operated dimmer Switch Foot-Operated LED dimmer Switch Full Range of in-line Sliding Control Switch Suitable for Floor Lamps/LED Lamps
Product details
| Management number | 213662773 | Release Date | 2026/04/12 | List Price | $36.00 | Model Number | 213662773 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
Outlet & Switch CombosdescribeProduct name: Foot-operated LED dimmerProduct color: blackMain material: plasticfeature:- Suitable for bedside lamps, table lamps, night lights, decorative lighting, etc.- With push button switch to turn off the power.- The dimming range can be adjusted by adjusting the bottom knob.- Slide the foot to operate the light cord LED dimmer.- Rope (sliding) full range dimmer switch.Input voltage: 220-240V 50/60HzOutput voltage: 220-240V 50/60HzDimming range: LED 3-24W; high voltage 3-60WInstallation methods and steps:1. First install the circuit board module correctly into the back cover. Please pay attention to the correct direction.2. Wiring. Connect the power and load wires to the corresponding terminals and tighten them with a screwdriver. (Please recognize the markings on the power terminals and load terminals on the circuit board, as well as the markings on the "L" wire, "N" wire, and ground wire.)3. Move the adjustment slider to the front or rear end; at the same time, move the slider on the front cover to the corresponding front or end.4. Install the button spring above the button portion of the circuit board.5. Close the plastic front cover, install the rear cover screws and tighten them to complete the installation. Please pay attention to whether the wire diameter of the incoming and outgoing wires is appropriate.notes:- Do not connect power until all installation steps have been completed.- Please confirm that your light bulb is dimmable and that the power is within the appropriate range.Package IncludedPackage Included:1 LED dimmerModel: EPC_LAS_01AOrigin: Mainland ChinaProduct Type: Dimmer
- Outlet & Switch Combos
| Color | One Color |
|---|---|
| Model | QTIWYXYS |
| Terminal | Blade |
| Brand Name | QTIWYXYS |
| Unit Count | 1.0 Count |
| Switch Type | Bipolar Transistor |
| Circuit Type | 1-way |
| Contact Type | Normally Closed |
| Manufacturer | QTIWYXYS |
| Mounting Type | DIN Rail Mount |
| Connector Type | Clamp |
| Current Rating | 1 Amps |
| Operation Mode | OFF-NONE-ON |
| Item Dimensions | 4.72 x 4.72 x 4.72 inches |
| Number of Items | 1 |
| Contact Material | Alloy Steel |
| Operating Voltage | 1 Kilovolts |
| Specification Met | UL |
| Number of Positions | 1 |
| Lower Temperature Rating | 1 Degrees Celsius |
| Upper Temperature Rating | 1 Degrees Celsius |
| International Protection Rating | IP00 |
Bestseller ranking
Outlet Switches
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form