500g+30ml Crystal Clear Hard UV Resin Set, Ultraviolet/Solar One Minute Fast Curing Resin Glue for Casting and Coating for Silicone Molds for Making Jewelry Pendants Earrings Bracelets Crafts DIY

The package includes: 1 x UV Resin (net weight: 500g) 1 x UV Resin small bottle (net volume: 30ml) Instructions: -Directly pour the resin in the mold or bezel. -Add colorants, glitter, dried flowers or anything you want in the resin using a toothpick or tweezers. -Cure both front and back sides of the resin with UV lamp or sunlight. -After curing, leave the resin to cool down for a few minutes instead of touching it inmediately with your hands. How to avoid bubbles: 1. Before using the resin, place the bottle upside down for a few minutes. 2. Warm up the mold a bit before using it. 3. Slowly squeeze the bottle instead of pouring the resin too quickly. 4. Add the resin in layers if large amount is needed, allowing the bubbles to escape. 5. Use a toothpick to move any bubble to the surface, then puncture it with a pin, or use a heat gun or a lighter to remove it with the heat. Attention: -Avoid contact with eyes, skin and clothing. -If you accidentally splash into your eyes, rinse immediately with plenty of water. -Rinse with soapy water after skin contact. -Keep out of reach of children. -Store the product in a cool, dry place, protected from light.

• CONVENIENT - UV resin ready to use, instantly cure hard with UV light or direct sunlight, no measure or mix. Special pointed nozzle for better control. One handy bottle of 30ml resin included in the set, so you can refill the small bottle when the big ones run out.
• FAST - This new upgrade UV resin can be cured completely hard under a 6W mini UV lamp in less than 2 minutes - less time and lower wattage required. Can also be cured under direct sunlight and it won't be slower.
• SHINING - Undoubtedly excellent transparency shining like diamond, 100% crystal clear and non-yellowing, with hard glassy finish and uniform gloss. Less shrinkage, less bubbles, lower viscosity. Tips to avoid bubbles: allow the resin to stand for a few minutes before use, and avoid the resin pouring out too fast during use.
• FUN - UV resin can be used widely for jewelry making, crafts decorations, casting and coating, garment accessories, cast figurines, object encapsulation and resin paintings, etc. It can also be mixed with mica powder, colorants, glitter to get colorful finishes.
• NON-TOXIC - Solvent-free, no harsh chemicals, cruelty free materials. There is an odor before curing, it is harmless and will completely disappear after curing. If you are sensible to odor, please keep the working area well ventilated and wear a mask.