600A Paint Process Large Battery Charger Alligator Clips with Terminals and Screws Booster Cable Clamps for Car Auto Vehicle Red/Black 2 Pairs (id: ec1 f85 209 714 57b

600A Paint Process Large Battery Charger Alligator Clips with Terminals and Screws Booster Cable Clamps for Car Auto Vehicle Red/Black 2 PairsProduct name:Paint Process Replacement Battery Clips/Booster Cable Clamps/Battery Charger Clips/Alligator Clips.Material:metal and rubber.Color:red and black.Jaw width:0.73inch/18.62mm.Head width:0.96inch/24.37mm.Tail width:4.72inch/120mm.Jaw open size maximum:1.73inch/44mm.Metal thickness:0.044inch/1.12mm.Length:5.94inch/151mm.Per piece approx.weight:7.47oz/212g.Cable hole approx.diameter:0.2inch/5.16mmHow to use:-Make sure both vehicles are turned off.-Connect one red clamps to the postive (+) post of the dead battery.-Connect another red clamps to the positive (+) post of the normal battery;-Connect one black clamps to the negative (-) post of the normal battery;-Connect another black clamps to the frame bumper or engine block of the dead battery.DO NOT CONNECT DIRECTLY TO THE NEGATIVE (-) POST.Cautions:1. Do not reverse the operation sequence of the jump .2. Do not use jump to start vehicle if the number of battery indicators are less than 3 to protect the jump from damage.3.Make sure clamps from one cable do not accidentally touch the clamps of the other cable. 4. Do remove the product from the vehicle within 30 seconds after the vehicle started, or it may cause security incidents.Package content :2pcs x red clamps2pcs x black clamps4pcs x wire teminals4pcs x screws

• PRODUCT NAME-600A easy grip handles booster cable clamps for car;The product is 600A Common Charge Clamps;Includes positive and negative clamps;Package include wire terminals and screws.
• SIZE-Jaw open approx.size maximum:1.73inch/44mm;Approx.length:5.94inch/151mm;Cable hole approx.diameter:0.2inch/5.16mm;Per piece approx.weight:7.47oz/212g.
• HOW TO USE-1)Make sure both vehicles are turned off.2)Connect one red clamps to the postive (+) post of the dead battery;3)Connect another red clamps to the positive (+) post of the normal battery;4)Connect one black clamps to the negative (-) post of the normal battery;5)-Connect another black clamps to the frame bumper or engine block of the dead battery.DO NOT CONNECT DIRECTLY TO THE NEGATIVE (-) POST.
• APPLICATION-Perfect for cars, motorcycles, trucks, SUVs.Cables work with top-post and side-terminal 12/24 volt batteries.
• PACKAGE CONTENT-2 pairs clamps;4pcs x wire teminals;4pcs x screws.