Molykote 112 150g 5.3oz High Performance Lube/Sealant Lubricant Grease for Valve Lubrication & Sealing High Consistency Nonmelting Silicone Shear Resistant Translucent White Dow Corning

MOLYKOTE 112 High Performance Lube / Sealant 150g one Tube Greaselike compound, is a stiff, nonmelting silicone material used primarily as a valve Lubricant and sealer. It will not carbonize at serviceability temperatures; has a very low vapor pressure; and will resist melting or hardening during long exposure to elevated temperatures. It is insoluble in water, methanol, ethanol, glycol, and glycerine; resistant to most aqueous solutions of inorganic salts, dilute acids, and alkalis; and unaffected by most vegetable and mineral oils, many organic compounds, and most common gases. MOLYKOTE 112 High Consistency Valve Sealant should be thoroughly tested in the specific application prior to use. Key Properties NLGI Grade 3, translucent white, used primarily as a general-purpose valve lubricant with high mechanical shear stability and high temperature range. Applications This product is similar to MOLYKOTE 111 Valve Lubricant and Sealant and is used in applications where a higher degree of mechanical stability is desired. Rubber & elastomer lubrication Valves, packings, seals & O-rings Performance Benefits Nonmelting Low volatility Thermally stable Serviceability from -40 to 450°F (-40 to 232°C) Excellent water and oil resistance Good resistance to most chemicals Good chemical resistance Good oxidation resistance Good plastic & rubber compatibility Good water resistance High speed performance High tack & adhesion High temperature performance Low temperature performance Wide temperature range Technology: Silicone NLGI Grade: 3 Thickener Silica Solid Lubricants: Silica Low Temperature: -40℃ High Temperature: 232℃ Color (PPSH-50) Translucent White

• MOLYKOTE 112, 150g 5.3oz one Tube. High Performance Lube / Sealant. High Consistency Valve Lubricant Grease. Nonmelting Silicone. Shear Resistant. General Purpose. Low volatility. Translucent White.
• NLGI Grade: 3, Thickener: Silica, Solid Lubricants: Silica, Temperature Range: -40 °C ~ 232 °C, Color: Translucent White, Flash Point: >101.1 °C, Specific Gravity: 1.1 at 25 °C. Volume Resistivity: 2.9 x 10^15 ohm-cm. Dielectric Strength: 490 V/mil.
• Valve Lubrication & Sealing. Rubber & elastomer lubrication. Valves, packings, seals & O-rings.
• Nonmelting, Shear Resistant, Low volatility, Thermally stable heat resistant. Low vapor pressure, Good oxidation resistance, Chemical resistance, Water-proof, Wide service-temperature range.