OM642 Intake Manifold Swirl Runner Connecting Rods Diesel 3.0L V6 Gaskets Repair kit for Mercedes R320/R350 ML320/ML350 GL320/GL350 S320/S350 CLS320/CLS350 C320/C350 E280/E320 CDI/BlueTEC

A common failure inherent to the intake manifold of Mercedes OM642 V6 CDI / CRD engines is for breakage of the actuating mechanisms on the intake swirl flap system. The plastic material used in the construction of the intake manifold is the main source of the problem. These swirl flaps help create better torque low down and enhance fuel economy. However the material of this lever that controls the swirl flaps has been incorrectly specified. Over time this less robust plastic material cannot withstand the constant heat cycles and mechanical stresses, therefore embittering and weakening the material leading to inevitable failure. Our Premium intake manifold repair kit is the only solution which solves all of these issues during your first and only repair... One of the faults of the OM642 diesel engine is the defective intake manifold flaps, they stop working due to the wear of the chuck fixing clips, the thrust guide of the connection to the flaps, and the seat plates on the dampers levers. The cause of wear is the material from which the vortex dampers drive system itself is made - plastic. Over time, the connection points of the linkage and the flaps wear out, this leads to a malfunctioning system of the vortex dampers of the manifold of the Mercedes. Engine control module stored pending codes for Intake Manifold Air Flap or Runner Control System problems, in order to fix this problem need a complete replacement of the "Intake Manifold Assembly"...... but by using our new repair kit, specially designed to save you money, you will not have to replace complete Intake Manifold Assembly.

• LIFE TIME WARRANTY ||| Repair Kit Includes: - 2 X Aluminum Rods (for Right and Left Intake manifolds) - 6 X Anti-friction adapters (contribute to easy slip. protect from wear and tear). - 6 X STRONG New Retainer Clips (fiber glass + plastic) - 2 X Link Rod Ball Socket - Genuine Mercedes and 2 Gaskets (For left and right intake manifolds) - 2 X Swirl arms and 2 X Gaskets.
• FITMENT: This part specifically used in 2005-2008 models of vehicles below: Grand Cherokee WK / WH ||| Commander XK / XH ||| Mercedes C320 / C350 CDI ||| Mercedes E280 / E320 CDI/BlueTEC Mercedes R320 / R350 CDI/BlueTEC ||| Mercedes ML320 / ML350 CDI/BlueTEC ||| Mercedes GL320 / GL350 CDI/BlueTEC ||| Mercedes S320 / S350 CDI/BlueTEC ||| Mercedes CLS320 / CLS350 CDI/BlueTEC ||| Chrysler 300C
• OEM Numbers: A6420905037 ||| A6420907737 ||| A6420905437 ||| A6420903237 ||| 6420903237 ||| 6420905037 ||| 6420905437 ||| 6420907737 ||| A 642 090 50 37 ||| A 642 090 77 37 ||| A 642 090 32 37 ||| A 642 090 54 37